Product Application
Stone and plastic PVC production line /PVC Stone sculpture floor/stone and plastic sheet,most plates,sheets and lines, is a new kind of high-tech research and development,the use of natural stone powder as the main raw material composed of high-density,solid grassroots high fiber network structure,the nature of the polymer surface covered with PVC resin,plastic extruder after molding or surface water transfer thermal processing.
Technology nano stone lines,the texture is very hard,safety and environmental protection,non-radiation,acid and alkali, resistant,good durability.Water transfer or thermal transfer process,the surface is smooth,good gloss.Glaze protection,low water absorption,totally impervious to stairs,without the use of specializes detergents,rinse clean with water directly.
List of the line
NO. | Name | Qty. | Power (KW) | Length (m) | Weight (T) |
1 | GSZ65/132 conical twin screw extruder | 1set | 68 | | 4 |
2 | XDX240 vacuum calibration table | 1set | 18 | | |
3 | hot stamping and embossing machine | 9set | 52.2 | | |
4 | XQG240 cutter | 1set | 2.5 | | |
5 | XFL240 stacker | 1set | | | |
Detail specifications of machines |
Items | Technical Parameters |
GSZ80/156Extruder |
Supplier of electric control cabinet | Main transducer and feeder's transducer: ABB; Air switch: Suzhou SIEMENS. |
Extrusion capacity (kg/h) | 250-400kgs/h (Max.) |
Outer Size (mm) | 4750mmX1550mmX2460mm |
Total Weight (Kg) | 5000Kg |
Hopper Taper | 60° |
Inlet wire terminal of power resource | Three-phase four-wire system |
Manufacture of the motors, pumps | The main AC motor: 75KW; Motor for feeder: 1.1KW |
Type of Temperature control curve | Temperature fluctuating self-adjusting (PID Type) |
Pressure Display | With melt pressure display |
Type of the feeder | Spiral spring feeder |
Connection of die head with flange | By bolts |
The display method of data in operating panel | Mainly digital display |
Main Features
1)CaCO3 add more than 300%,low cost formula.
2)High wear resistant screw and barrel design,long life use.
3) Special design of mould flow design,long continuous production time.
4) Produce surface can do a variety of different varieties.
For choosing the proper machine and saving your time, please read these bellow guides carefully
1). What kinds of plastic machinery do you need ? Or what material do you want to process?
2). What capacity do you want? (kg/h )
3). What is the max and min size of the finish products .For example, the width and thickness of sheet(mm)?
4) What is the electric device you need ? Siemens, Omron or domestic ?
5) When do you want the machine? (Times for delivery)
6) Other requirements about the machine you want.
if you are interested in this machine ,please contact me:
mob : +86 13817556740
Jeremy He